These rollers are essential tools for applying fiberglass fabrics. They help to wet out the fabric with resin and remove trapped air for a stronger laminate. Can be cleaned with acetone before the resin sets up.
Straight rollers for large, relatively flat and convex surfaces. Heavy-duty spiral grooves force glass down into the laminate while pushing resin up to better remove entrapped air and produce a strong laminate. Deep fins allow air to get out faster. Machined corners reduce glass fiber shearing. 1/4" steel frame for long lasting durability. Plastic handles for easy cleanup. 1"x 3", 1"x 6".
Heavy-duty plastic specialty roller. A must for concave surfaces. Prevent "roller end dig in." Ferrule reinforced plastic threaded han-dle. I" x 3" , 15" radius.
Use wherever possible in radii and grooves to increase glass-to-resin ratio for stronger laminates in these critical areas. 1/4" steel frame for long lasting durability. Corro-sion resistant plastic. Ferrule rein-forced plastic handle. 2" x 5/16" radius.
Use for Polyester or Epoxy. These new rollers do jobs large rollers and brushes can-not do. New deep grooved plastic roller with strong, deep fins. Excellent air release. Resin and solvent resistant. Steel frame. Easy to clean. Economical. 1/2" x 3", 1/2" x 5".
LAMINATING ROLLER SLEEVE
This is an inexpensive and effective tool for compressing the laminate
and rolling out air bubbles. This ribbed plastic sleeve slides over
our regular roller frame the same way a paint roller sleeve does.
1-3/4" x 7".